Three heat pump quotes: £6,200, £8,900 and £11,400. Which one is really the best? The price is not one number. It depends on whether the grant is already deducted, whether radiators and a hot water cylinder are included, and how the system was sized. This guide shows what to check in a heat pump quote, so you can compare heat pump quotes like for like before you accept one.
What Should a Heat Pump Quote Include?
A proper heat pump quote should include a home survey, a room-by-room heat loss calculation, the named heat pump model and kW size, the design flow temperature, a radiator or emitter plan, a hot water cylinder, pipework and electrical work, controls, commissioning, MCS details, any grant deduction, warranty, VAT and payment terms. If a line is missing, ask whether it is excluded or simply not mentioned.
Heat Pump Quote Checklist
Use this heat pump quote checklist to compare an air source heat pump quote line by line.
| Item | What to look for | Why it matters |
|---|---|---|
| Survey | A visit to your home, not just a phone call | Radiators, cylinder space and electrics can only be seen on site |
| Heat loss calculation | Room by room, with the method named | Sizing depends on it |
| Heat pump | Model and kW size stated | Avoids vague “suitable unit” wording |
| Flow temperature | Design temperature stated | Affects efficiency and radiator needs |
| Radiators and emitters | Which are kept, replaced or added | A common gap in cheap quotes |
| Hot water cylinder | Size, type and location included | May be excluded or priced separately |
| Pipework and electrics | Pipework, consumer unit, circuits | Can add cost late in the job |
| Controls and commissioning | Smart controls, commissioning, handover | Affects how well it runs |
| Grant and VAT | Whether the price is before or after grant, and the VAT rate | Prevents comparing different numbers |
| Warranty and aftercare | Length, cover, who backs it | Not all warranties are equal |
Does the Heat Pump Quote Include a Heat Loss Calculation?
This is the most important question. A heat pump quote that does not mention a room-by-room heat loss calculation has not shown how the unit was sized. The calculation comes first, and the unit is chosen from it. An oversized unit can short-cycle, which can reduce efficiency, while an undersized one may struggle on cold days.
Under the MCS design standard, MIS 3005-D, a room-by-room heat loss calculation to BS EN 12831-1:2017 is required before installation. Some installers give an initial estimate first and complete the full calculation after a survey. That is not necessarily wrong, but you should ask when the full calculation happens and whether the price could change. Treat “we will size it on the day” or a rule of thumb per square metre as a reason to ask more questions. Check standards and installer certification on the MCS website yourself.
Heat Pump Quote Before Grant vs After Grant
Is the quoted price before or after the grant? Check this first. Under the Boiler Upgrade Scheme, the installer normally applies for the grant on your behalf and takes it off your bill. One installer may show the full price and then deduct the grant. Another may show only the amount you pay. Comparing the two directly is a mistake.
Grant values in England and Wales, per the GOV.UK grant notice updated 21 July 2026:
- Air-to-water heat pump: £7,500
- Ground source heat pump: £7,500
- Air-to-air heat pump: £2,500
The Energy Saving Trust adds that eligible off-gas-grid properties can get a temporary £9,000 grant for an air source or ground source heat pump from 21 July 2026 to 31 March 2027. Eligibility and amounts can change, so check GOV.UK before you rely on any figure. These numbers were last checked on 16 November 2026.
Illustrative example. Figures are not real quotes or UK market prices.
| Item | Quote A | Quote B |
|---|---|---|
| Price shown | £12,000 before grant | £4,500 after grant |
| Grant deducted (assumed £7,500) | Not yet | Yes |
| Price you would pay | £4,500 | £4,500 |
| Looks cheaper at first glance | No | Yes |
Quote B looks £7,500 cheaper, but once both are on the same basis they cost the same. Always ask each installer to show the price before grant, the grant amount and the amount you pay.
VAT on a Heat Pump Quote
HMRC’s VAT Notice 708/6 shows a temporary zero rate for the installation of qualifying energy-saving materials, including heat pumps, to 31 March 2027, with the reduced rate of VAT applying from 1 April 2027. The rate depends on the date of supply, so ask each installer which rate they have used and for the reason. Put every quote on the same VAT basis before you compare it.
Radiators, Cylinder and Pipework: The Lines Cheap Quotes Skip
Does a heat pump quote include radiators? Not always. Heat pumps typically run at lower flow temperatures than gas boilers, so some rooms may need larger radiators. Does a heat pump quote include a hot water cylinder? Again, check. A cylinder needs space, and the quote should say whether it is new, where it goes and who removes the old one. Also look for pipework, electrical work and any consumer unit changes. A quote that says “all existing radiators suitable” without a calculation deserves a question.
Why Heat Pump Quotes Vary So Much
- Unit size and brand: different models, kW sizes and manufacturers.
- Emitters: radiators kept, upgraded or replaced.
- Hot water: a new cylinder or reuse of the old one.
- Electrical work: a consumer unit upgrade or new circuit.
- Controls and commissioning: basic or smart, detailed or minimal.
- Access: scaffolding or difficult site conditions.
- Grant and VAT treatment: before or after, and which rate.
- Aftercare: warranty length and servicing.
Worked Example: Two Heat Pump Quotes for the Same House
Again, these figures are illustrative only, and both prices are before grant.
| Item | Quote A (£11,400) | Quote B (£8,600) |
|---|---|---|
| Home survey | Yes | Not mentioned |
| Heat loss calculation | Room by room | Not mentioned |
| Radiator upgrade | Included where needed | Excluded |
| Hot water cylinder | Included | Excluded |
| Commissioning | Described | Not described |
| MCS paperwork | Described | Not mentioned |
Quote B is £2,800 cheaper on paper, but several items that could be needed are not covered. Ask Installer B to confirm in writing whether each is included, excluded or priced separately, then compare again. Neither quote wins automatically.
How to Compare Heat Pump Quotes Like for Like
- Give every installer the same job list.
- Put every price on the same grant basis: before grant, grant, and amount you pay.
- Put VAT on the same basis.
- List every exclusion and allowance.
- Compare the heat loss calculation, flow temperature and emitter plan.
- Compare warranty, aftercare and payment stages.
- Get answers in writing, then compare the revised totals.
How many heat pump quotes should I get? Three is a common starting point, as long as each covers the same job. For the wider method, see our guide on how to compare builder quotes.
Heat Pump Quote Red Flags
- No survey, or a quote given by phone only
- No mention of a heat loss calculation
- “All radiators are fine” with no calculation
- No MCS details
- A vague warranty
- A large upfront deposit
- Pressure to sign today
A single flag is a reason to ask questions, not proof of a problem. Is a heat pump quote without a survey valid? It can be a starting estimate, but a phone quote cannot show radiator sizes, cylinder space or whether your electrics need work.
12 Questions to Ask Every Heat Pump Installer
- Will you survey my home before I accept?
- Have you done, or will you do, a room-by-room heat loss calculation, and when?
- What heat pump model and kW size are you proposing?
- What flow temperature is the system designed for?
- Which radiators will be kept, upgraded or replaced?
- Is a hot water cylinder included, and where will it go?
- Is any electrical work or consumer unit upgrade included?
- Is the price before or after the grant?
- Which VAT rate is applied, and why?
- What does commissioning involve?
- What warranty and aftercare do you provide, and who backs it?
- What deposit and stage payments do you require?
Deposit, Payment Stages and Warranty
There is no single figure that fits every job. Ask what any deposit pays for, whether payments are tied to completed stages and how the grant is handled if the work changes. Ask who backs the warranty and what it covers, and confirm everything in writing.
Do You Need Planning Permission?
Planning rules for an outdoor unit depend on your property, its location and noise. Check the Planning Portal and your local authority before you agree to anything, and ask the installer who is responsible for checking. This is a separate question from the quote itself.
Compare Your Heat Pump Quotes with ScopeCheck
Got two or more heat pump quotes? ScopeCheck shows what each one includes, what is missing and how each treats the grant and VAT, then suggests questions to send each installer. It flags whether a quote mentions MCS details, a heat loss calculation and the other items above. It does not check certification or inspect your home, so check MCS registration yourself. You can compare your heat pump quotes, see an example report or upload your quotes for a free preview, with no sign-up to start. ScopeCheck does not take money from traders and does not endorse installers. It is provided by Dashient Ltd, and AI-assisted analysis can contain errors, so check the original wording.
Heat Pump Quote FAQs
What should a heat pump quote include?
A home survey, room-by-room heat loss calculation, named model and kW size, flow temperature, emitter plan, hot water cylinder, pipework, electrics, controls, commissioning, MCS details, grant treatment, warranty, VAT and payment terms.
Does a heat pump quote include radiators?
Not always. Ask whether existing radiators are kept, upgraded or replaced, and whether this is based on a heat loss calculation.
Is a heat pump quote before or after the grant?
It varies. Some installers show the full price, others show the price after grant. Ask each to state the price before grant, the grant and your payment.
Why is one heat pump quote so much cheaper?
It may leave out a heat loss calculation, radiator upgrades, a cylinder or commissioning detail. Ask for written clarification before you compare totals.
How do I check an installer is MCS certified?
Check the installer’s certification on the MCS website yourself. ScopeCheck does not verify it for you.
