A bathroom fitting quote should name one fixed total price and split the job into stages: strip-out, first fix, wall and floor preparation, tanking, tiling, electrics, second fix and making good. It should also say who supplies each product, what is excluded, how long the price is valid and whether VAT is included. So what should a bathroom fitting quote include? This guide sets out the wording to look for and the gaps that appear most often.
If something is missing from a quote, either it is not being done or it may be charged later. Finding that out before you accept is much easier than finding it out halfway through the job. This is a general guide, not legal or financial advice.
The short answer
Citizens Advice says a quote should include:
- a fixed total price, not a daily rate
- a breakdown of all the work and materials
- separate costs for each material and part of the work
- how long the price is valid for
- whether it includes VAT
For a bathroom, add the points that tend to go missing: a named waterproofing system, a clear tile allowance, who certifies the electrics, who removes the waste and what "finished" means at the end. The checklist below covers each one.
Quote or estimate: check what you actually have
Before you read the detail, check what kind of document you are holding. Citizens Advice explains that a quote is a fixed price, whereas an estimate is a rough guess, so with an estimate you might end up paying more. A trader can't normally charge more than a quote unless you ask for extra work or they made a genuine mistake in the price.
Bathrooms are a common place for this confusion. A one-page document headed "estimate" with a single sum and wording such as "bathroom refit, supply and fit" tells you very little. It may not be a fixed price at all, and it gives you little to hold anyone to if the job grows.
If you have an estimate, ask the fitter to confirm in writing whether they will turn it into a fixed-price quote once they have seen the room. Also ask what would cause the price to change. A fitter who is happy to answer that clearly is usually easier to work with than one who stays vague.
What a bathroom fitting quote should include: the checklist, line by line
Use this as a tick-list against each quote. Where you see "look for", that is the kind of wording that shows the item is genuinely covered.
Protection and strip-out
- Protection of floors, stairs and doorways between the bathroom and the front door.
- Removal of the existing suite, tiles, flooring and any boxing-in or old cupboards.
- Capping off or disconnecting existing services safely.
Look for: "Strip out existing suite, wall and floor tiles and flooring; protect hallway and stairs."
Waste removal
- Who takes the rubble and old sanitaryware away, and whether a skip or waste carrier visit is included.
- Whether the cost is in the price or charged separately.
Look for: "All waste removed from site and disposed of by us." If the quote is silent, ask. It is one of the classic items that a builder's quote may not include.
First-fix plumbing
- Moving or renewing supply and waste pipes, including any new positions for the toilet, basin, bath or shower.
- New valves, a waste connection for the shower and any pipework to a heated towel rail.
- Whether existing pipework is being reused or replaced.
Look for: a description of what moves, not just "plumbing included".
Boarding, plastering and floor preparation
- Replacement of damaged boards or plaster behind the old tiles.
- Levelling or overboarding the floor, and any new subfloor.
- Treatment of walls that will be tiled or painted.
Old tiled walls often reveal problems once they come off. Ask how the fitter would handle hidden damage and whether any repair is allowed for in the price.
Tanking and waterproofing
Tanking is the waterproofing of the areas that get wet, usually the shower enclosure and often the floor. It is a hidden layer that cannot be inspected once the tiles are on, so it is worth getting in writing. If you are not sure why this matters, read what bathroom tanking is and why it matters.
So, is tanking included in a bathroom quote? Not always, and not always for the same areas. Look for:
- a named system or product, not just "waterproofing"
- which areas are covered: shower walls and floor, around the bath, the whole floor
- the completion point, before any tiling starts
Look for: "Tank shower enclosure walls and floor using [named system] before tiling." If tanking is not mentioned at all, ask directly.
Tiling
This is an area where quotes can differ a lot. Check for:
- the tiled area in m² (walls and floor shown separately), or a clear description of which walls are tiled and to what height
- a tile allowance, meaning what has been priced for the tiles themselves, per m² or as a total
- adhesive, grout, trims and edging strips
- whether the allowance includes wastage and cutting
- any extra charge for large-format tiles, patterns or niches
Look for: "Supply and fit wall tiles to shower walls and half-height to remaining walls, tile allowance as stated, adhesive, grout and trims included."
Electrics
- Extractor fan, lighting (including any bathroom-rated fittings), shaving socket, heated towel rail, underfloor heating or an electric shower.
- Who carries out the work and who issues the certificate or notification.
The electrics and regulations section below covers this in more detail.
Second fix
- Fitting the toilet, basin, taps, bath, shower valve, screen and towel rail.
- Fitting furniture and accessories such as mirrors, shelves and rails, if included.
- Testing the plumbing and checking for leaks.
Sealing and making good
- Silicone around the bath, shower tray, screen and basin.
- Making good plaster, boarding and skirting after the work.
- Refitting or replacing skirting, architrave or door lining where the floor level has changed.
"Making good" can mean very different things. Ask what the standard is and whether it stops before decorating.
Decorating
- Whether painting of walls and ceiling is included, and how many surfaces.
- Whether the work stops at "ready for decoration" or includes paint.
Programme, guarantee and VAT
- Start date and expected duration, and what happens if the work overruns.
- Any guarantee on workmanship, in writing, and what it covers.
- How long the quote is valid.
- Whether VAT is included, stated clearly in the total.
Supplied or fit only: who buys what
A bathroom fitter quote usually falls into one of two models, and mixing them up is an easy way to end up with a dispute.
- Supply and fit: the fitter buys and installs the product. The quote should say which items, from where and at what specification.
- Fit only: you buy the product and the fitter installs it. You carry the delivery, storage, returns and any missing parts.
Most quotes are a mix. The suite might be bought by you, the tiles by the fitter and the shower screen by nobody in particular. Go through each item and write down who buys it.
| Item | Who supplies? | In the price? |
|---|---|---|
| Toilet, basin, bath or shower tray | ||
| Taps and shower valve | ||
| Shower screen | ||
| Tiles | ||
| Adhesive, grout, trims | ||
| Vanity unit or furniture | ||
| Extractor fan, lights, towel rail | ||
| Waste removal |
Allowances and PC sums
Some quotes carry an allowance or PC sum for items such as tiles or sanitaryware. This is a budget set aside for products you have not yet chosen. It can be perfectly reasonable, but it can also hide the real price. If one fitter has allowed a modest sum for tiles and another has priced a very different tile, the totals are not comparable.
Ask for the allowance to be stated per item or per m², and ask what happens if your choice costs more or less. The difference should be adjusted on a documented basis, not left to guesswork.
Electrics and regulations: what the bathroom fitting quote should say
Bathrooms combine water and electricity, so the quote should state who is doing the electrical work and how it will be certified.
Which? Trusted Traders says changes to electrical wiring, fuse boxes and circuits in the home must comply with Part P of the building regulations. If you don't use a registered electrician for notifiable work, you must notify building control before the work begins. Whether your bathroom electrics count as notifiable work depends on what is being changed, so ask the fitter to confirm in writing.
Check the quote for:
- who carries out the electrical work: the fitter, a named electrician or a subcontractor
- whether that person is registered to self-certify, or whether building control will be notified
- what paperwork you will receive at the end, and when
- whether the extractor fan, lights, heated towel rail and any underfloor heating are included
Ask for the certificate when the job is finished and keep it with your property papers. Rules can change and differ across the UK, so check the current position on gov.uk or with your local building control team. This is not legal advice.
Where bathroom quotes differ
Prices for the same bathroom can look far apart, and the first reason to check is scope. Checkatrade notes that bathroom fitting quotes can vary more than you might expect: one fitter may include plumbing, electrics, tiling and waste removal, while another prices some of those separately. That is why comparing what each quote actually covers is more useful than comparing the totals alone.
This matters most when one quote is much lower. Citizens Advice says to be cautious if a price is a lot lower than other quotes, because the contractor may not be quoting for exactly the same work. If that is your situation, read our guide to a quote that is much cheaper than the others.
A same-scope comparison table
Copy this into a notes app or spreadsheet and fill in one column per fitter. Where a quote is silent, write "not stated" rather than assuming yes.
| Line | Fitter A | Fitter B | Fitter C |
|---|---|---|---|
| Strip-out and waste removal | |||
| First-fix plumbing | |||
| Wall and floor preparation | |||
| Tanking (named system, areas covered) | |||
| Tiling (m², allowance, trims, grout) | |||
| Electrics (items and certification) | |||
| Second fix | |||
| Making good and decorating | |||
| Items supplied by you | |||
| Exclusions listed | |||
| VAT included? | |||
| Quote validity | |||
| Start date and duration |
Once the table is filled in, look at the blanks. A blank is either a question to put to the fitter or a cost you may have to cover yourself. Ask each fitter to revise their quote to the same scope, so you are comparing like with like.
Before you say yes: deposit, contract and cooling-off
Once you have chosen a fitter, make sure the quote and agreed scope are in a written contract or in a signed acceptance that refers to the quote. Any changes you agree later, such as a different tile or an added niche, should also be written down with the price effect.
Pay in stages tied to finished work you can see. For a bathroom, a sensible example is making sure the waterproofing is complete before tiling starts and before the related payment falls due. Be wary of large payments requested before any materials are ordered or any work is done.
On cancelling, Citizens Advice says 14 days is the minimum cooling-off period a seller must give for building work in the cases where it applies. It starts the day after you give the go-ahead, and you don't automatically get it if you arranged the work on the business's own premises. Whether it applies depends on how the contract was agreed, so check with Citizens Advice for your situation. This is general information, not legal advice.
Compare bathroom quotes side by side with ScopeCheck
Filling in a table by hand works, but it is slow once you have three or four documents with different layouts. ScopeCheck helps UK homeowners compare 2 to 5 quotes line by line, so you can see what is included, what is missing and where the prices really differ. There is a free preview for 2 quotes.
ScopeCheck compares quote wording only. It does not inspect or certify work, and it does not give legal or financial advice. It does not recommend or rank traders and does not take money from them. You can compare your bathroom quotes line by line when you are ready.
Frequently asked questions
What should be included in a bathroom fitting quote?
A fixed total price, a breakdown of the work and materials, who supplies what, the work stages from strip-out to making good, exclusions, how long the price is valid and whether VAT is included. Citizens Advice sets out the basics of what a quote should show.
Should a bathroom quote include tanking and waterproofing?
It should say clearly whether it does. Look for a named system and the areas it covers, such as the shower enclosure or the whole floor. If it is not mentioned, ask before accepting.
Is removal of the old bathroom and rubbish included in a bathroom fitter's quote?
Not always. Some fitters include strip-out and waste removal, while others price a skip or tip run separately. Look for wording such as "all waste removed from site".
Does a bathroom fitting quote include VAT, tiles and the suite?
It depends on the quote. VAT should be stated as included or not, and the tiles and suite are only included if the quote says who supplies them. Watch for allowances that may not match what you want to buy.
Can a bathroom fitter charge more than their quote?
Citizens Advice says a trader can't charge more than a quote unless you ask for extra work or they made a genuine mistake in the price. An estimate is different, because it is only a rough guess. Agree any extra work and its cost in writing.
